The ASUS ProArt PA401 Wood Edition is an ATX mid-tower PC case designed for builders who prioritize strong airflow, premium styling, and convenient assembly. It includes dual 160mm front fans delivering up to 138 CFM, a tempered-glass side panel, an FSC-certified wooden front panel, and support for ATX, Micro-ATX, and Mini-ITX motherboards.
Recommended For
- Content creators, editors, and professionals building an ATX workstation who want strong front-to-back airflow, a clean appearance, and support for a conventional air cooler or 240mm top radiator.
- Builders who want a professional, furniture-friendly PC without RGB-heavy styling; the wood front panel, black interior, and tempered-glass side panel suit studios, offices, and minimalist workspaces.
- DIY builders who value straightforward assembly and maintenance, including a detachable PSU bracket, integrated cable-management features, tool-free panel access, and a built-in PWM fan hub.
- ATX or micro-ATX builders using a short-to-medium-length graphics card who want a relatively compact mid-tower with good cooling and room for up to four internal drives.
Real-World Use Scenarios
- A creator builds a photo, video, or 3D-workstation PC for a home office and wants a professional appearance instead of RGB lighting. The PA401 Wood Edition presents a restrained design, shows the components through its tempered-glass panel, and provides adequate airflow for a conventional high-performance workstation.
- A user assembles a new ATX or Micro-ATX system and wants to reduce build time and cable-management frustration. The detachable power-supply bracket, rear cable clips, removable panels, and spacious cable-routing area make installation and cleanup easier than working in a tightly packed compact case.
- A gamer or creator uses a mid-to-high-end CPU and graphics card for sustained rendering, editing, or gaming sessions and wants predictable temperatures without filling the case with extra fans. The included large front intakes provide effective baseline airflow, although reviewers indicate that the case is better suited to standard high-performance hardware than to oversized graphics cards or extreme liquid-cooling setups.
- Someone places the PC on or beside a desk in a shared office, studio, or living space and wants cooling control during different workloads. The built-in fan controls allow a quieter everyday setting and a higher-airflow setting when the CPU or GPU is under sustained load, so the user can balance noise and cooling without adding a separate fan controller.
- A builder wants a relatively compact ATX case for a workstation or gaming PC but still needs several internal drives and conventional tower-cooler support. The PA401 can accommodate a practical mix of 3.5-inch and 2.5-inch storage, but the user should verify graphics-card length, power-supply clearance, and radiator requirements before choosing unusually large components.
Spec Summary
| Attribute | Value |
|---|
| Best For | ATX, Micro ATX, and Mini-ITX PC builds needing a mid-tower enclosure with tempered glass, wood and steel construction, configurable air or water cooling, and support for multiple internal drives |
|---|
| Case Design And Materials | Black ATX mid-tower case made from ABS, steel, tempered glass, and wood, with a tempered glass side panel and FSC-certified wooden front panel |
|---|
| Motherboard And Power Supply Fit | Supports ATX, Micro ATX, and Mini-ITX motherboards with a bottom-mounted power supply and PSU length clearance up to 170 mm |
|---|
| Cooling And Dust Management | Supports air or water cooling, with two 160 mm PWM front fans, one 120 mm PWM rear fan, top radiator support up to 240 mm, and front and bottom dust filters |
|---|
| Expansion And Drive Bays | Includes seven expansion slots, two internal 3.5-inch drive bays, and two internal 2.5-inch drive bays |
|---|
| Component Clearance | Accommodates graphics cards up to 315 mm long and CPU coolers up to 160 mm high |
|---|
| Case Dimensions | Measures 19.8 inches deep, 8.9 inches wide, and 16.2 inches high |
|---|
| Model Identifiers | ASUS ProArt PA401 Wood Edition, model PA401/BK/WOOD/TG//, part number 90DC00M0-B38000 |
|---|
Reference Q&A
Q: Is the ASUS ProArt PA401 Wood Edition a good choice for a compact ATX workstation or creator PC?
A: Yes, if you need ATX support in a relatively compact mid-tower and prefer a subdued design over RGB-focused styling. It supports ATX, Micro ATX, and Mini-ITX boards, includes two 160 mm front fans, and provides cable-management features. The main trade-off is tighter component clearance than in larger cases, especially for long graphics cards and oversized coolers.
Q: What are the main component-clearance limitations of the ASUS ProArt PA401 Wood Edition?
A: The case supports graphics cards up to 315 mm long, CPU coolers up to 160 mm tall, and power supplies up to 170 mm long with the listed configuration. A 312 mm graphics card has been reported to fit with very little clearance, so cards near the limit should be checked carefully before purchase.
Q: Does the ASUS ProArt PA401 Wood Edition provide good airflow and noise performance?
A: It has a strong airflow-oriented setup on paper, with two 160 mm PWM front fans, a 120 mm rear fan, front and bottom dust filters, and a selectable fan-speed control. However, at least one owner described the front panel as restrictive, so cooling results may depend on the specific hardware and fan settings. It is best suited to buyers who value balanced airflow without requiring the most open-front design.
Q: Will a large air cooler or 240 mm liquid cooler fit in the ASUS ProArt PA401 Wood Edition?
A: The case supports a top-mounted radiator up to 240 mm and CPU air coolers up to 160 mm tall. Cooler models above 160 mm should be treated as incompatible, while models at exactly 160 mm may have limited clearance depending on memory height and fan placement. Verify the cooler’s actual height and RAM clearance before buying.