We‘re shipping as usual! The Canada Post strike only affects certain remote deliveries and PO Boxes. 
Holiday Shipping Details & Extended Holiday Returns
P8 PWM PST
Pressure-optimized 80 mm Fan with PWM PST
Suitable for heatsink and radiator, this 80mm fan produces high static pressure for efficient cooling. Fluid Dynamic Bearing and new ARCTIC motor ensure minimum vibration, minimum noise and maximum durability. The 4-pin connector enables PWM control of speed for balanced performance and noise.
Optimized for Static Pressure
During the development of the new P8 PWM PST, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P8 PWM PST is particularly suitable for use on heatsink and radiators.
High Quality Bearing
Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.
Maximum Quietness, Minimum Vibration
Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable. Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor.
Extended Life Span
A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature.
200 to 3000 RPM regulated via PWM PST
Thanks to the 4-pin connector, the RPM can be regulated in a broad spectrum via PWM. In this way, noise is kept at a minimum while maximum cooling performance is guaranteed when needed.
Two Ways of Installation
