Newegg.ca - A great place to buy computers, computer parts, electronics, software, accessories, and DVDs online. With great prices, fast shipping, and top-rated customer service - once you know, you Newegg.
If you are reading this message, Please click this link to reload this page.(Do not use your browser's "Refresh" button). Please email us if you're running the latest version of your browser and you still see this message.
Operating Systems Supported: PC computer with one 32-bit PCI slot
MS Windows 98SE/Me/2000/Windows Server 2003/XP/NT 4.0/Vista/7/ Linux
Features: PCI Specification Revision 2.2 compliant
Silicon Image SIL 3512 host controller chip
Support 66 Mhz PCI with 32-bit data
Compliant with programming interface for Bus Master IDE Controller, Rev1.0
Support programmable and EEPROM, FLASH & EPROM loadable PCI class mode
Integrated SATA Transport, Link Logic & PHY layer
48-bit sector addressing
Virtual DMA
Serial ATA Specification Revision 1.0 compliant
Dual independent DMA channels with 256KB FIFO per Serial-ATA channel, transfer rate up to 1.5Gb/s.
Operating Systems Supported: Windows 7 (Use Vista Driver)
Vista 32-bit/64-bit
Windows XP 32-bit/64-bit
Windows 2000
Server 2003 32-bit/64-bit
Server 2008 32-bit/64-bit
Linux
Mac OS
Operating Systems Supported: Windows 7 (Please download the latest driver from our website for Windows 7 support)
Vista
Windows XP
Windows 2000
Windows 2003
Operating Systems Supported: MS Windows 98/98SE/ME/2000/XP/Vista/7
Dimensions: 7" x 6" x 2"(LxWxH)
Features: 5x External ports
1x Internal Port (shared with first external port)
USB 2.0 EHCI and USB 1.1 OHCI compliant
Backward compatible with USB 1.1 devices
Transfer rate: each port up to 480Mpbs
Over current protection, each port 500mA
Simultaneous operation of multiple high-performance devices
PCI Rev. 2.2 compliant
Supports hot-plug, PCI Low-power mode and wake-up supporting
Supports up to 127 devices per port
Operating Systems Supported: Windows 2000/Server 2003/Server 2008/XP/Vista/Windows7/Mac/Linux
Features: 1-Lane (x1) PCI-Express with transfer rate 2.5 Gb/s Full Duplex channel.
All external ports are compatible to eSATA Specification.
Hot plug of external SATA devices supported.
Compliant with PCI Express Specification Revision 1.0a.
Compliant with Serial ATA II Specification.
Compliant with Gen2i, Gen2m SATA II Electrical Specification Revision 1.0.
Fully Plug & Play.
Backward compatible to SATA 1.0 Specificatio.
Support Native Command Queue (NCQ), FIS Based Switching with Port Multiplier.
Support 2-independent SATA channels.
Operating Systems Supported: Windows 8
Windows 7 32/64-bit
Vista 32/64-bit
Windows XP
Server 2003
Features: Chipset: Marvell 88SE9120
Compliant with PCI-e Specification v2.0 and Backward Compatible with PCI-e 1.x
Compliant with Serial ATA Specification 3.0
Supports Communication Speeds of 6.0Gbps, 3.0Gbps, and 1.5Gbps
Hot Plug and Hot Swap
Supports Native Command Queuing (NCQ)
Supports Port Multiplier FIS Based Switching or Command Based Switching
Compatible with SATA 6G, 3G, and 1.5G Hard Drive.
RAID: Supports RAID function 0 and 1
Adjustable stripe side for RAID 0
Supports co-exist RAID set and Non-RAID HDD
Allow HDDs with different sizes to be configured in a RAID set
Operating Systems Supported: Windows 8
Windows 7 32/64-bit
Vista 32/64-bit
Windows XP
Server 2003
Features: Chipset: Marvell 88SE9120
Compliant with PCI-e Specification v2.0 and Backward Compatible with PCI-e 1.x
Compliant with Serial ATA Specification 3.0
Supports Communication Speeds of 6.0Gbps, 3.0Gbps, and 1.5Gbps
Hot Plug and Hot Swap
Supports Native Command Queuing (NCQ)
Supports Port Multiplier FIS Based Switching or Command Based Switching
Compatible with SATA 6G, 3G, and 1.5G Hard Drive.
Operating Systems Supported: Windows 7 32/64bit
Vista
Windows XP
Windows 2000
Server 2008 64bit
Server 2003 32/64bit
Features: Supports PM Aware and Non-PM Aware Host
Plug and Play. No Driver, No BIOS, and No Software Required for RAID Operation
No External DRAM, No Processor Required for RAID Operation
Supports SATA II Gen2i and Gen2m
Supports Native Command Queue (NCQ)
Supports Hot-plug
Operating Systems Supported: Windows 8
Windows 7
Vista
Windows XP
Server 2008
Server 2008 R2
Server 2003
Linux 2.6.x and Above (AHCI devices driver is a built-in feature)
Features: Chipset: Marvell 88SE9215
Compliant with PCI-Express Specification v1.0
Compliant with Serial ATA Specification 3.0
Supports Communication Speeds of 6.0 Gbps, 3.0 Gbps, and 1.5 Gbps
Hot Plug and Hot Swap
Supports Native Command Queue (NCQ)
Supports Port Multiplier FIS Based Switching or Command Based Switching
Compatible with SATA 6G, 3G and 1.5G Hard Drives.
LOADING...
