Pros: -Cheap! I prices out stock acrylic to cut/make my own and this was cheaper???
-Looks Awesome!
-Good Fans!
-High Quality!

Cons: Little small:
-8800GTX is too long with the power connectors without modifying the side of the case
-8800GT fits but with I'm going to have to drill little holes for the pins on the SLI Connector.
-Danger Den Water blocks (GPU) too tall but Zalman's worked.
-Metal for backplate is a little soft, I stripped out one screw already

Other Thoughts: Even with the cons I had to give this case 5 eggs.
I love it.
Note.. If you are going to water cool you will need to buy some Glass cutting bits for your drill to make holes in the side and drill SLOW.. I put 2 holes in, piece of cake!
Also. Measure your Video cards! it is a little small.. or be ready to do some cutting

Pros: Easiest case I've ever worked with, front or top panel are so easy to remove to add or remove components. Lots of wow factor, espically with UV lights in it (even more so because I set my lights up with an IR sensor so my universal remote turned them on and off).

Cons: I/O panel vs. drive bays. I didn't pay attention to this when I was buying this case. Either the front panel is on the front and the back is on the left or the back is on the back and the front is on the left. With a water cooling system on the CPU and GPU it still gets warm enough for the tape/glue of my lights to melt.

Other Thoughts: A combo of con and pro was that after a while I never used the lights anymore so I was able to swap the IR control to the side fans so they could be on during gaming and off when it is in HTPC mode.

Given the alignment of the "front" and "back" I suggest getting an external drive enclosure.

Pros: It looks awesome.

Cons: Not enough fan ports, Easy to crack/chip, vibrates some when screws aren't totally tight, Compact design makes overheating a potential issue.

Pros: Costs less then I could find raw materials/tools to DIY for
Good Air Flow
Looks Awesome
Easy to assemble
Good Quality Acrylic
Easy to get part Numbers without removing cover!
Good For Cable management

Cons: -Some parts Delicate, could be stronger: I stripped out 2 MB Mounts (from acrylic) and 1 Card Slot Holder Screw (from aluminum)
-Size: Room for card height/length is at a minimum.
-Difficult to replace HD's once assembled.

Other Thoughts: I really love this case. Even with Cons I'm giving it 5 Eggs. Price makes up for it.
-Important Note: 8800/9800GT Fits Fine! BUT the 8800GTX/Ultra will not fit!!! (Not without cutting slot in side and holes in top for power)
ALSO: For Water cooling: GPU Full Covers like Danger den will not fit without Cutting top of case as there is <.5cm clearance between full height cards and the top of the case. I finally found the Zalman ZM-GWB8800GT which has barbs on the side rather than the top.

Pros: Very nice too look at with lots of nerd bling.

Cons: Overall the case has a very flimsy feel and gives you the impression that it was built with poor quality. The outer screws that hold the case together are very flimsy also. Even though I was able to put it together, this case was very hobby-ish and if it wasn't for all my other experience with putting computer cases together, I wouldn't have been able to use this case. The directions are incomplete and seems like there is a missing page. I had to look at cases other people built to finish mine. Also, I had to improvise a lot to get everything to work. This case is not for beginners!

Pros: Looks nice, seems well built.

Cons: Try to fit a high end video card into it. There's just no room. I'm going to have to return it.

Other Thoughts: I don't recommend this product. If only they gave it 2 more inches width and height.

Pros: Light, small, 2 fans included in package, everything in the package, no scratches, extra screws, and everything fit correctly. With how the air flows in this case... my processor is about 6C cooler while playing WoW.

Cons: Directions aren't the easiest to read. Most of the screws have that "cheap" feel. Alittle acrylic left in some of the screw holes. All edges except for the top pannel are somewhat sharp. LED lights on front are extremly bright.

Other Thoughts: I bought this case for the lightness and the compact size since I do move my comp from place to place alot. I expected the fans I bought with LED's to be bright but the LEDs on the small board with the power switch, usb's, and audio ports are ridiculous.

Pros: After getting fed up with Sunbeam's customer service I called newegg to see if they could do anything sort of returning the whole enchilada. Newegg went above and beyond the call of duty and sent me a new case fan of my choosing and shipped it free.

Cons: Dealing with Sunbeam, which won't happen again.

Other Thoughts: Next time I build a pretty see through case I'm just going to local supplier of Lucite and have them cut me a few boards to spec. Then I'll buy some uv-floro reactant spray and some case fans from newegg.

Pros: The case is sturdier than it appears. It has great airflow for components. It is quite visually stunning, the pictures don't do it justice.

Cons: One of the included fans is defective. It lights up, but only spins up maybe half the time. I tested the power quality and it is fine, just got a bad fan.

Sunbeams CSR's are just ignoring me.

I don't want to disassemble my entire computer and send the case back to newegg for a defective fan.

Other Thoughts: This case is great, but if you have problems you should expect to be on your own.

Pros: looks fancy what is there to say...
i think i got lucky turns out my "blue" LED fans turned out to be black light LED fans which really makes the case just amazing now. i put 4 uv cold cathodes in it and it just glows and the whole room lights up with it

Cons: a tad small.. read ur specs... i didnt but eh im starting to learn to grow to the size

Other Thoughts: this is gonna hold my amd baby :D